Dell PowerConnect 6248 User's Guide - Page 544

The related virtual link data displays. 3. Click Delete. The virtual link is removed, and the device is updated. Configuring Virtual Link Data Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • OSPF Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-15. OSPF Virtual Link Commands CLI Command area virtual-link area virtual-link authentication area virtual-link dead-interval area virtual-link hello-interval area virtual-link retransmit-interval area virtual-link transmit-delay show ip ospf virtual-link Description Creates the OSPF virtual interface for the specified area-id and neighbor router. Configures the authentication type and key for the OSPF virtual interface identified by the area ID and neighbor ID. Configures the dead interval for the OSPF virtual interface on the virtual interface identified by area-id and neighbor router. Configures the hello interval for the OSPF virtual interface on the virtual interface identified by the area ID and neighbor ID. Configures the retransmit interval for the OSPF virtual interface on the virtual interface identified by the area ID and neighbor ID. Configures the transmit delay for the OSPF virtual interface on the virtual interface identified by the area ID and neighbor ID. Displays the OSPF Virtual Interface information for a specific area and neighbor. 544 Configuring Routing