Dell PowerConnect 6248 User's Guide - Page 381

3. Specify the Port or LAG you are copying from in Copy Parameters From. 4. Click Copy To for each Interface/LAG to receive these parameters. 5. Click Apply Changes. The GVRP Port Parameter settings are copied, and the device is updated. Modifying GVRP Parameters for Multiple Ports 1. Open the GVRP Global Parameters page. 2. Click Show All. The GVRP Port Parameters Table displays. 3. Click Edit for each Interface/LAG to modify. 4. Edit the GVRP Port Parameter fields as needed. 5. Click Apply Changes. The GVRP Port Parameter settings are modified, and the device is updated. Configuring GVRP Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • GVRP Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-32. GVRP Commands CLI Command clear gvrp statistics garp timer gvrp enable (global) gvrp enable (interface) gvrp registration-forbid gvrp vlan-creation-forbid show gvrp configuration show gvrp error-statistics show gvrp statistics Description Clears all the GVRP statistics information. Adjusts the GARP application join, leave, and leaveall GARP timer values. Enables GVRP globally. Enables GVRP on an interface. De-registers all VLANs, and prevents dynamic VLAN registration on the port. Enables or disables dynamic VLAN creation. Displays GVRP configuration information, including timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP Displays GVRP error statistics. Displays GVRP statistics. Configuring Switching Information 381