Dell PowerConnect 6248 User's Guide - Page 496

• GVRP Statistics - Selects GVRP Statistics when clicked, and specifies the type of GVRP statistics to graph from the drop-down menu. The default is Join Empty - Receive. • Refresh Rate - Selects the amount of time that passes before statistics are refreshed. The possible field values are No Refresh, 15, 30 and 60 seconds. The default rate is No Refresh. Displaying Port Statistics 1. Open the Ports Statistics page. 2. Select the port for which statistics will be charted. 3. Click the radio button associated with the statistics to chart. 4. Select the type of statistics from the related drop-down menu. 5. Select the desired refresh rate from the Refresh Rate drop-down menu. 6. Click Draw. The selected statistics are charted on the graph. Viewing Port Statistics Using CLI Commands For information about the CLI commands that perform this function, see the following chapters in the CLI Reference Guide: • System Management Commands • RMON Commands • GVRP Commands The following table summarizes the equivalent CLI commands for this feature. Table 8-13. Port Statistics Commands CLI Command show interfaces counters show statistics ethernet show rmon statistics show gvrp statistics Description Display traffic seen by the interface. Displays detailed statistics for a specific port or for the entire switch. Displays RMON Ethernet Statistics. Displays GVRP statistics. LAG Statistics Use the LAG Statistics page to chart LAG-related statistics on a graph. To display the page, click Statistics/RMON →Charts →LAGs in the tree view. 496 Viewing Statistics and Remote Monitoring