Dell PowerConnect 6248 User's Guide - Page 695

• Color Mode - Selects the type of color policing used. Choose Color Blind or Color Aware from the drop-down menu. • Conform Action Selector - Selects what happens to packets that are considered conforming (below the police rate). Options are Send, Drop, Mark CoS, Mark IP DSCP, Mark IP Precedence. • Violate Action - Selects what happens to packets that are considered non-conforming (above the police rate). Options are Send, Drop, Mark CoS, Mark IP DSCP, Mark IP Precedence. Configuring Policing for a Policy-Class Instance 1. Select Policing from the Traffic Conditioning drop-down menu on the Diffserv Policy Class Definition page. The Diffserv Policy - Policing page displays. 2. Check to select one or more policing criteria to use for this policy-class. 3. Select or enter a value for each field selected. 4. Click Apply Changes. The following Policy Rate Configuration page displays. Figure 11-12. Policy Rate Configuration 5. Enter the desired criteria values for Committed Rate and/or Committed Burst Size. 6. Click Apply Changes. Policing is configured for the specified policy-class instance, and the device is updated. Defining Policy Classes Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • QoS Commands The following table summarizes the equivalent CLI commands for this feature. Configuring Quality of Service 695