Dell PowerConnect 6248 User's Guide - Page 185

Table 6-31. RADIUS Server Commands CLI Command auth-port key msgauth name primary radius-server host show radius-servers Description Sets the port number for authentication requests of the designated radius server. Sets the authentication and encryption key for all RADIUS communications between the switch and the RADIUS daemon. Enables the message authenticator attribute to be used for the RADIUS Authenticating server being configured. Assigns a name to a RADIUS server. Specifies that a configured server should be the primary server in the group of authentication servers which have the same server name. Specifies a RADIUS server host and enter RADIUS Configuration mode. Displays the RADIUS server settings. RADIUS Accounting Server Configuration From the RADIUS Accounting Server Configuration page, you can add a new RADIUS accounting server, configure settings for a new or existing RADIUS accounting server, and view RADIUS accounting server status information. The RADIUS client on the switch supports up to 32 named authentication and accounting servers. To access the RADIUS Server Configuration page, click System →Management Security →RADIUS Accounting Server Configuration in the tree view. Figure 6-57. RADIUS Accounting Server Configuration The RADIUS Accounting Server Configuration page contains the following fields: Configuring System Information 185