Dell PowerConnect 6248 User's Guide - Page 146

The Default Domain Name page contains the following field: • Default Domain Name (0-255 characters) - Contains the user-defined default domain name. When configured, the default domain name is applied to all unqualified host names. Defining DNS Domain Names Using CLI Commands For information about the CLI commands that perform this function, see the IP Addressing Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to define DNS domain names. Table 6-16. DNS Domain Names Commands CLI Command ip domain-name Description Use to define a default domain name to complete unqualified host names. Host Name Mapping Use the Host Name Mapping page to assign an IP address to a static host name. The Host Name Mapping page provides one IP address per host. To display the Host Name Mapping page, click System →IP Addressing →Host Name Mapping. Figure 6-25. Host Name Mapping The Host Name Mapping page contains the following fields: • Host Name - Contains a list of host names. Host names are defined on the Add Static Host Name Mapping page. Each host provides one IP address. • IP Address - Provides an IP address that is assigned to the specified host name. • Remove Host Name - Removes the host name IP mapping when checked. 146 Configuring System Information