Dell PowerConnect 6248 User's Guide - Page 573

Configuring Router Discovery Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Router Discovery Protocol Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-30. Router Discovery Commands CLI Command ip irdp ip irdp address ip irdp holdtime ip irdp maxadvertinterval ip irdp minadvertinterval ip irdp preference Description Enables Router Discovery on an interface. Configures the address that the interface uses to send the router discovery advertisements. Configures the value, in seconds, of the holdtime field of the router advertisement sent from this interface. Configures the maximum time, in seconds, allowed between sending router advertisements from the interface. Configures the minimum time, in seconds, allowed between sending router advertisements from the interface. Configures the preference of the address as a default router address relative to other router addresses on the same subnet. Router Discovery Status Use the Router Discovery Status page to display Router Discovery data for each port. To display the page, click Routing →Router Discovery →Status in the tree view. Figure 9-34. Router Discovery Status The Router Discovery Status page displays the following fields: • Interface - The router interface for which data is displayed. Configuring Routing 573