Dell PowerConnect 6248 User's Guide - Page 222

3. Define the relevant fields. 4. Click Apply Changes. The SNMP view is added, and the device is updated. Displaying the View Table 1. Open the SNMP View Settings page. 2. Click Show All. The View Table page displays: Figure 6-88. View Table Removing SNMP Views 1. Open the SNMP View Settings page. 2. Click Show All. The View Table page displays. 3. Select an SNMP view. 4. Check the Remove check box. 5. Click Apply Changes. The SNMP view is removed, and the device is updated. Defining SNMP Views Using CLI Commands For information about the CLI commands that perform this function, see the SNMP Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to define SNMP views. 222 Configuring System Information