Dell PowerConnect 6248 User's Guide - Page 659

• IntlfID - The Interface ID that the neighbor advertises in its Hello packets on this link. • Interface - The slot/port that identifies the neighbor interface index. • State - State of the relationship with this neighbor. • Dead Time - Number of seconds since last Hello was received from adjacent neighbors. Set this value to 0 for neighbors in a state less than or equal to Init. Displaying the OSPFv3 Neighbor Table 1. Open the OSPFv3 Neighbor Table page. 2. Select the interface to display from the Interface drop-down menu. The OSPF neighbor table for the selected interface displays. Displaying the OSPFv3 Neighbor Table Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • OSPFv3 Commands The following table summarizes the equivalent CLI commands for this feature. Table 10-20. OSPFv3 Neighbor Table Commands CLI Command show ipv6 ospf neighbor Description Displays information about OSPF neighbors. OSPFv3 Link State Database Use the OSPFv3 Link State Database page to display the link state and external LSA databases. The OSPFv3 Link State Database page has been updated to display external LSDB table information in addition to OSPFv3 link state information. To display the page, click IPv6 →OSPFv3 →Link State Database in the tree view. Configuring IPv6 659