Dell PowerConnect 6248 User's Guide - Page 148

3. Select a Host Name Mapping Table entry. 4. Check the Remove check box. 5. Click Apply Changes. The Host Name Mapping Table entry is removed, and the device is updated. Mapping an IP Address to Domain Host Names Using CLI Commands For information about the CLI commands that perform this function, see the IP Addressing Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-17. Host Name Mapping Command CLI Command ip host Description Use to configure static host name-to-address mapping in the host cache. Dynamic Host Name Mapping Use the Dynamic Host Name Mapping page to view dynamic host entries the switch has learned. To display the Dynamic Host Name Mapping page, click System →IP Addressing →Dynamic Host Name Mapping in the tree view. Figure 6-28. Dynamic Host Name Mapping The Dynamic Host Name Mapping page contains the following fields: • Host Name - Contains a list of host names. • Total Time - Total time of the dynamic entry. • Elapsed Time - Elapsed time of the dynamic entry. • Address - IP address of dynamic entry. • Remove - Select the entry to remove from the table, and then click Apply Changes to remove the selected entry from the Host Name IP Mapping list. 148 Configuring System Information