Dell PowerConnect 6248 User's Guide - Page 225

Figure 6-91. Access Table Removing a Group 1. Open the Access Control Configuration page. 2. Click Show All. The Access Table opens. 3. Select a group. 4. Check Remove. 5. Click Apply Changes. The group is removed, and the device is updated. Defining SNMP Access Control Using CLI Commands For information about the CLI commands that perform this function, see the SNMP Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to define SNMP Access Control. Table 6-42. SNMP Access Control Commands CLI Command snmp-server group snmp-server community-group show snmp groups Description Configures a new SNMP group or a table that maps SNMP users to SNMP views. Maps SNMP v1 and v2 security models to the group name. Displays the configuration of groups. SNMPv3 User Security Model (USM) Use the SNMPv3 User Security Model (USM) page to assign system users to SNMP groups and to define the user authentication method. To display the SNMPv3 User Security Model (USM) page, click System →SNMP →User Security Model in the tree view. Configuring System Information 225