Dell PowerConnect 6248 User's Guide - Page 187

Figure 6-59. RADIUS Accounting Server Status 3. To remove a named accounting server, select the check box in the Remove column. 4. Click Apply Changes. The RADIUS accounting server is removed from the list. Configuring RADIUS Accounting Server Settings Using CLI Commands For information about the CLI commands that perform this function, see the RADIUS Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-32. RADIUS Accounting Server Commands CLI Command acct-port key name radius-server acct show radius-servers Description Sets the port number for the designated radius accounting server. Sets the authentication and encryption key for all RADIUS communications between the switch and the RADIUS daemon. Assigns a name to a RADIUS accounting server. Specifies a RADIUS accounting server host and enter RADIUS Server Configuration mode. Displays the RADIUS accounting server settings. RADIUS Accounting Server Statistics Use the RADIUS Accounting Server Statistics page to view statistical information for each RADIUS accounting server configured on the system. To access the RADIUS Accounting Server Statistics page, click System →Management Security → RADIUS Accounting Server Statistics in the tree view. Configuring System Information 187