Dell PowerConnect 6248 User's Guide - Page 282

• IP Address - The (first) network-layer address that is reported in the Address TLV of the most recently received ISDP message. • Version - Displays the Version string for the neighbor. • Holdtime - Displays the ISDP holdtime for the neighbor. • Capability - Displays the ISDP Functional Capabilities for the neighbor. • Platform - Displays the ISDP Hardware Platform for the neighbor. • Port ID - Displays the ISDP port ID string for the neighbor. • Protocol Version - Displays the ISDP Protocol Version for the neighbor. • Last Time Changed - Displays when entry was last modified. Viewing ISDP Cache Table Information CLI Commands For information about the CLI commands that perform this function, see the CDP Interoperability Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to view and configure ISDP. Table 6-68. ISDP Cache Commands CLI Command clear isdp table show isdp entry show isdp neighbors Description Clears entries in the ISDP table. Displays ISDP entries. Displays the list of neighboring devices. Interface Configuration From the ISDP Interface Configuration page, you can configure the ISDP settings for each interface. If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to transmit ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the interface will not transmit ISDP packets, regardless of the mode configured on the interface. To access the ISDP Interface Configuration page, click System →ISDP →Interface Configuration in the navigation tree. 282 Configuring System Information