Dell PowerConnect 6248 User's Guide - Page 251

Figure 6-111. Unit Configuration The Unit Configuration page contains the following fields: • Switch ID - Specifies unit to be configured. • Change Switch ID to - Changes the unit number of the selected unit. • Management Status - Shows whether the selected unit is a Management Unit or a Stack Member. • Unit Type - Specify whether the select unit is the Management Unit (Stack Master), a Stack Member, or the Standby Switch. • Hardware Management Preference - Management preference by hardware configuration to be considered for selection as Management unit. • Admin Management Preference - Determines whether this unit is capable of becoming the master switch. Values range from Disable (the unit cannot support Master Switch function) to Preference 15. The higher value means that the unit is more desirable than another unit with lower value for running the management function. An additional value is Unassigned, which means that preference is not configured, and election of the Master is left to the stack units. • Preconfigured Model Identifier - A 16-byte character string to identify the pre-configured model of the selected unit. Configuring System Information 251