Dell PowerConnect 6248 User's Guide - Page 220

SNMP notifications are enabled, and the device is updated. Enabling Authentication Trap 1. Open the Global Parameters page. 2. Select Enable in the Authentication trap field. 3. Click Apply Changes. Authentication notifications are enabled, and the device is updated. Enabling SNMP Notifications Using CLI Commands For information about the CLI commands that perform this function, see the SNMP Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to enable SNMP notifications. Table 6-40. SNMP Notifications Commands CLI Command show snmp engineID show snmp engineid show trapflags snmp-server enable traps snmp-server engineID local Description Displays the SNMP engine ID. Displays the SNMP engine ID. Shows the status of the configurable SNMP traps. Enables SNMP traps globally or enables specific SNMP traps. Specifies the Simple Network Management Protocol (SNMP) engine ID on the local switch. SNMP View Settings Use this page to create views that define which features of the device are accessible, and which are blocked. You can create a view that includes or excludes OIDs corresponding to interfaces. Use the SNMP View Settings page to define SNMP views. To display the SNMP View Settings page, click System →SNMP →View Settings in the tree view. 220 Configuring System Information