Dell PowerConnect 6248 User's Guide - Page 420

Modifying LLDP Interface Settings for Multiple Ports 1. Open the LLDP Configuration page. 2. Click Show All. The LLDP Interface Settings Table displays. 3. Click Edit for each Unit/Port to modify. 4. Edit the LLDP Interface fields as needed. 5. Click Apply Changes. The LLDP Interface settings are modified, and the device is updated. Configuring LLDP with CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • LLDP Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-50. LLDP Commands CLI Command lldp notification lldp notification-interval lldp receive lldp timers lldp transmit lldp transmit-mgmt lldp transmit-tlv show lldp Description Enables remote data change notifications. Limits how frequently remote data change notifications are sent. Enables the LLDP receive capability. Sets the timing parameters for local data transmission on ports enabled for LLDP. Enables the LLDP advertise capability. Specifies that transmission of the local system management address information in the LLDPDUs is included. Specifies which optional TLVs in the 802.1AB basic management set will be transmitted in the LLDPDUs. Displays the current LLDP configuration summary. LLDP Statistics Use the LLDP Statistics page to view LLPD-related statistics. To display the LLDP Statistics page, click Switching →LLDP →LLDP Statistics in the tree view. 420 Configuring Switching Information