Dell PowerConnect 6248 User's Guide - Page 627

Creating a DHCPv6 Pool 1. Open the Pool Configuration page. 2. Select Create from the Pool Name drop-down menu. 3. Enter a new name in the Pool Name field. 4. Specify an existing DNS Server Address to associate with this pool, or create a new one. 5. Specify an existing Domain Name to associate with this pool, or create a new one. 6. Click Apply Changes. The new pool is saved, and the device is updated. If a new DNS server address or domain name was specified, it is also saved. Modifying DHCPv6 Pool Parameters 1. Open the Pool Configuration page. 2. Select the pool for which parameters are changing from the drop-down Pool Name menu. 3. Change or set up a new DNS Server Address for the specified pool. 4. Change or set up a new Domain Name for the specified pool. 5. Click Apply Changes. The DHCPv6 Pool parameter modifications are saved, and the device is updated. Deleting a DHCPv6 Pool or Parameter 1. Open the Pool Configuration page. 2. Select the pool to be affected from the drop-down Pool Name menu. 3. Click the Delete box if deleting the DNS Server Address for this pool. 4. Click the Delete box if deleting the Domain Name for this pool. 5. Click the Delete Pool box if deleting the entire pool. 6. Click Apply Changes. The pool or its parameter setting is deleted, and the device is updated. Configuring DHCPv6 Pool Parameters Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • DHCPv6 Commands The following table summarizes the equivalent CLI commands for this feature. Configuring IPv6 627