Dell PowerConnect 6248 User's Guide - Page 324

4. Use the Unit drop-down menu to view the Protected Port Summary table for other units in the stack, if they exist. Adding Protected Port Groups 1. Open the Protected Port Configuration page. 2. Click Add. The Add Protected Group displays. Figure 7-24. Add Protected Port 3. Use the drop-down menu to assign the numeric designation 0, 1, or 2 to the Protected Group ID. 4. Enter a Protected Group Name (1-32 characters). 5. Click Apply Changes. The Protected Group settings are copied, and the device is updated. Configuring Protected Ports With CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Switchport Protected Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-13. Protected Port Commands CLI Command show switchport protected switchport protected switchport protected name Description Displays protected group/port information. Configure a protected port. Configures a name for a protected group LAG Configuration Link Aggregation allows one or more full-duplex Ethernet links to be aggregated together to form a Link Aggregation Group (LAG). The switch can treat LAG as if it were a single link. 324 Configuring Switching Information