Dell PowerConnect 6248 User's Guide - Page 764

Table 12-30. IPv6 MLD Membership Information Command CLI Command show ipv6 mld-proxy groups Description Displays information about multicast groups that the MLD Proxy reported. Interface Membership Information-Detailed The Interface Membership Information-Detailed page provides additional information on the IP multicast groups for which the MLD proxy interface has received membership reports. To display this page, click IPv6 Multicast →MLD →Proxy Interface →Interface Membership Info Detailed in the navigation tree. Figure 12-32. Interface Membership Information-Detailed The Interface Membership Information - Detailed page contains the following fields: • Interface - Select the interface on which MLD proxy is enabled for which data is to be displayed. • Multicast Group IP - Select the IP multicast group address for which data is to be displayed. If no group membership reports have been received on the selected MLD Proxy interface you will not be able to make this selection, and none of the non-configurable data will be displayed. • Source Address - This parameter shows source addresses which are members of this multicast address. • Expiry Time - Displays the expiry time in hours:minutes:seconds since the entry was created in the cache table. • Click Refresh to refresh the data on the screen with the present state of the data in the router. DisplayingIPv6 MLD Membership Detailed Information Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • IPv6 Routing Commands 764 Configuring IP Multicast