Dell PowerConnect 6248 User's Guide - Page 297

Figure 7-5. Port Security Table 3. Use the Unit drop-down menu to view the Port Security Table for other units in the stack, if they exist. Defining Multiple Locked Ports 1. Open the Port Security page. 2. Click Show All. The Port Security Table displays. 3. Click Edit for each port whose parameters are to be changed. 4. Fields can now be edited as needed for these ports. 5. Click Apply Changes. The changes are made to the Port Security table, and the device is updated. Configuring Port Security with CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Address Table Commands The following table summarizes the equivalent CLI commands you use to configure port security. Table 7-3. Port Security Commands CLI Command port security (no port security) port security max show ports security Description Disables the learning of new addresses on an interface. To enable new address learning, use the no form of the port security command. Configures the maximum addresses that can be learned on the port while the port is in port security mode. Displays the port-lock status. Configuring Switching Information 297