Dell PowerConnect 6248 User's Guide - Page 336

Figure 7-34. Static MAC Address Table Removing a Static Address from the Static Address Table 1. Open the Static MAC Address page. 2. Click Show All to display the Static MAC Address Table. 3. Check the Remove check box for the address to be removed. 4. Click Apply Changes. The static address is deleted, and the device is updated. Configuring Static Address Parameters Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Address Table Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-18. Static Address Table Commands CLI Command bridge address show bridge address-table static Description Adds a static MAC-layer station source address to the bridge table. Displays static entries in the bridge-forwarding database. Dynamic Address Table The Dynamic Address Table page contains fields for querying information in the dynamic address table, including the interface type, MAC addresses, VLAN, and table sorting key. Packets forwarded to an address stored in the address table are forwarded directly to those ports. The Dynamic Address Table also contains information about the aging time before a dynamic MAC address is removed from the table. To display the Dynamic Address Table, click Switching →Address Tables →Dynamic Address Table in the tree view. 336 Configuring Switching Information