Dell PowerConnect 6248 User's Guide - Page 582

NOTE: For a static reject route, the next hop interface value is Null0. Packets to the network address specified in static reject routes are intentionally dropped. To display the page, click Routing →Router →Route Preferences Configuration in the tree view. Figure 9-41. Router Route Preferences Configuration The Router Route Preferences Configuration page contains the following fields: • Local - This field displays the local route preference value. • Static - The static route preference value in the router. The default value is 1. The range is 1 to 255. • OSPF Intra - The OSPF intra route preference value in the router. The default value is 110. • OSPF Inter - The OSPF inter route preference value in the router. The default value is 110. • OSPF External - The OSPF External route preference value in the router (OSPF External are OSPF Type-1 and OSPF Type-2 routes). The default value is 110. • RIP - The RIP route preference value in the router. The default value is 120. Configuring Route Preferences 1. Open the Route Preferences Configuration page. 2. Define the applicable fields on this page 3. Click Apply Changes. The route preferences are configured, and the device is updated. Configuring Route Preferences Using CLI Command For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • OSPF Commands 582 Configuring Routing