Dell PowerConnect 6248 User's Guide - Page 768

• Admin Mode - Displays the administrative status of the selected PIM protocol on the system. • Data Threshold Rate - If PIM-SM is selected as the protocol, shows the minimum source data rate in Kbps above which the last-hop router switches to a source-specific shortest path tree. • Register Threshold Rate - If PIM-SM is selected as the protocol, shows the minimum source data rate in Kbps above which the Rendezvous Point router switches to a source-specific shortest path tree. Viewing Global PIM Settings Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • PIM-DM or PIM-SM Commands The following table summarizes the equivalent CLI commands for this feature. Table 12-33. PIM Global Settings Summary Commands CLI Command show ip pimdm show ip pimsm Description Displays system-wide information for PIM-DM. Displays the system-wide information for PIM-SM. PIM Interface Configuration Use the PIM Interface Configuration page to configure specific interfaces with PIM. To display the page, click IPv4 Multicast →PIM →Interface Configuration or IPv6 Multicast →PIM → Interface Configuration in the tree view. Figure 12-35. PIM Interface Configuration The PIM Interface Configuration page contains the following fields: 768 Configuring IP Multicast