Dell PowerConnect 6248 User's Guide - Page 294

Table 7-1. 802.1x Authentication Commands CLI Command dot1x mac-auth-bypass dot1x max-req dot1x max-users dot1x port-control dot1x re-authenticate dot1x re-authentication dot1x system-auth-control dot1x timeout quiet-period dot1x timeout re-authperiod dot1x timeout server-timeout dot1x timeout supp-timeout dot1x timeout tx-period show dot1x show dot1x ethernet dot1x guest-vlan dot1x unauth-vlan Description Enables MAB on an interface. Sets the maximum number of times the switch sends an EAP-request frame to the client before restarting the authentication process. Sets the maximum number of clients supported on the port when MAC-based 802.1X authentication is enabled on the port. Enables manual control of the authorization state of the port. Manually initiates a re-authentication of all 802.1x-enabled ports or a specified 802.1X enabled port. Enables periodic re-authentication of the client. Enables 802.1X globally. Sets the number of seconds the switch remains in the quiet state following a failed authentication attempt Sets the number of seconds between re-authentication attempts. Sets the number of seconds the switch waits for a response from the authentication server before resending the request. Sets the number of seconds the switch waits for a response to an EAPrequest frame from the client before retransmitting the request. Sets the number of seconds the switch waits for a response to an EAPrequest/identify frame from the client before resending the request. Displays 802.1X status for the switch or the specified interface. Shows the status of MAC Authentication Bypass. Sets the guest VLAN on a port. Specifies the unauthenticated VLAN on a port. Authenticated Users The Authenticated Users page is used to display lists of ports that have authenticated users. To display the Authenticated Users page, click Switching →Network Security →Authenticated Users in the tree view. 294 Configuring Switching Information