Dell PowerConnect 6248 User's Guide - Page 534

Table 9-12. OSPF Neighbor Table Commands CLI Command show ip ospf neighbor Description Displays information about OSPF neighbors. Neighbor Configuration Use the OSPF Neighbor Configuration page to display the OSPF neighbor configuration for a selected neighbor ID. When a particular neighbor ID is specified, detailed information about a neighbor is given. The information below is only displayed if OSPF is enabled and the interface has a neighbor. The IP address is the IP address of the neighbor. To display the page, click Routing →OSPF →Neighbor Configuration in the tree view. Figure 9-13. OSPF Neighbor Configuration The OSPF Neighbor Configuration page contains the following fields: • Interface - Select the VLAN interface on which routing is enabled from the drop-down menu. • Neighbor IP Address - Select the IP Address of the neighbor for which data is to be displayed. • Router ID - A 32-bit integer in dotted decimal format that identifies the neighbor router. • Options - The optional OSPF capabilities supported by the neighbor. The OSPF Options field is present in OSPF Hello packets, Database Description packets, and all link-state advertisements. The Options field enables OSPF routers to support (or not support) optional capabilities, and to 534 Configuring Routing