Dell PowerConnect 6248 User's Guide - Page 562

• Global Route Changes - Displays the number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age. • Global Queries - Displays the number of responses sent to RIP queries from other systems. • Default Information Originate - Enable or Disable Default Route Advertise. • Default Metric - Sets a default for the metric of redistributed routes.This field displays the default metric if one has already been set, or blank if not configured earlier. Valid values are 1 to 15. Configuring RIP 1. Open the RIP Configuration page. 2. Enter data in the fields as needed. 3. Click Apply Changes when finished. RIP is configured, and the device is updated. Configuring RIP Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Routing Information Protocol (RIP) Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-25. RIP Global Configuration Commands CLI Command auto-summary default-information originate default-metric distance rip enable hostroutesaccept router rip show ip rip split-horizon Description Enables the RIP auto-summarization mode. Controls the advertisement of default routes. Sets a default for the metric of distributed routes. Sets the route preference value of RIP in the router. Resets the default administrative mode of RIP in the router (active). Enables the RIP hostroutesaccept mode. Enters Router RIP mode. Displays information relevant to the RIP router. Sets the RIP split horizon mode. 562 Configuring Routing