Dell PowerConnect 6248 User's Guide - Page 234

Removing a Filter 1. Open the Notification Filter page. 2. Click Show All. The Show Notification page displays. 3. Select the Filter Table entry. 4. Check Remove. The filter entry is removed, and the device is updated. Configuring Notification Filters Using CLI Commands For information about the CLI commands that perform this function, see the SNMP Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to configure notification filters. Table 6-45. Notification Filters Configuration Commands CLI Command show snmp filters snmp-server filter Description Displays the configuration of filters. Creates or updates an SNMP server filter entry. Notification Recipients Use the Notification Recipients page to view information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services: • Identifying Management Trap Targets • Trap Filtering • Selecting Trap Generation Parameters • Providing Access Control Checks To display the Notification Recipients page, click System →SNMP →Notification Recipient in the tree view. 234 Configuring System Information