Dell PowerConnect W Clearpass 100 Software 3.9 Deployment Guide - Page 110
Resetting Onboard Certificates and Configuration, Advanced: Device Authentication During Provisioning
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Resetting Onboard Certificates and Configuration To delete certificates, re-create the Onboard Web login page, or reset configuration to factory default settings, go to Onboard > Reset to Factory Defaults, or click the Reset to Factory Defaults command link. The Reset to Factory Defaults page opens. This page is used to delete certificates, or restore the default configuration for Onboard. These options are useful while trialing the Onboard workflow with a set of test devices. Select one of the following options in the Reset Type drop-down list: Delete all client certificates - Removes all client certificates from Certificate Management. The certificate authority's root certificate, intermediate certificate, profile signing certificate, and any server certificates are not affected. The provisioning settings for iOS and Onboard-capable devices are not modified. Delete all certificates - Removes all certificates from Certificate Management, including the certificate authority's root certificate, intermediate certificate, profile signing certificate, and any server certificates. The default certificate authority certificate will be recreated. The provisioning settings for iOS and Onboard-capable devices are not modified. Re-create the Onboard weblogin page - Select this option to create the default device_provisioning Web login page, if it has been deleted or has been modified and no longer functions correctly. All certificates and settings are left unmodified. Delete all certificates and reset configuration to factory defaults - Removes all certificates from Certificate Management, including the certificate authority's root certificate, intermediate certificate, profile signing certificate, and any server certificates. The provisioning settings for iOS and Onboardcapable devices are restored to the default settings. The default certificate authority will be recreated. Mark the Reset the specified items check box to indicate that the reset operation should be performed, and then click Reset to Factory Defaults to perform the operation. Advanced: Device Authentication During Provisioning When the Enable device authentication check box is marked, a RADIUS request is performed during the device provisioning step. The local RADIUS server is always used for this request. The attributes sent with the RADIUS request are listed in Table 17 on page 111. 110 | Onboard ClearPass Guest 3.9 | Deployment Guide