Dell PowerConnect W Clearpass 100 Software 3.9 Deployment Guide - Page 35

The configuration for the virtual machine includes one virtual Ethernet adapter. The initial network configuration of this adapter is: Table 7 Virtual ethernet adapter configuration Item Network Adapter Configuration Method IP Address Netmask Gateway DNS Adapter Name Hostname DHCP - - - - eth0 clearpass-guest.localdomain Accessing the Console User Interface The appliance's console user interface can be used to perform basic administrative functions such as changing the network configuration or viewing the appliance's MAC address details. It is also possible to recover a forgotten administrator password, or reset the appliance to its factory default settings. For hardware appliances, you may access the console using a null modem cable connected to the serial port on the rear of the chassis. Use serial port settings of 9600 baud, 8 data bits, no parity, and 1 stop bit. Flow control is not required. Both hardware and virtual appliances support command-line access directly at the console, and remotely via SSH. The following table summarizes the methods that you may use to access the console user interface. Table 8 Console access methods Access Method Hardware Appliance Serial VGA Console SSH Yes 9600, 8-N-1 Yes Use VGA display and a PS/2 or USB keyboard Yes Virtual Appliance No Yes Use host's virtual console Yes Console Login To access the console user interface:  Log in with the username admin and the appliance's root password. This is admin by default, but is changed during the initial setup wizard. ClearPass Guest 3.9 | Deployment Guide Setup Guide | 35