Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 101
System memory, System memory guidelines
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Next steps 1. Install the NVME riser. 2. Install the GPU riser 2. 3. Follow the procedure listed in After working inside your system. System memory System memory guidelines The PowerEdge XE2420 system supports DDR4 registered DIMMs (RDIMMs) and load reduced DIMMs (LRDIMMs). System memory holds the instructions that are executed by the processor. Your system memory is organized into eight channels per processor (two memory sockets per channel) for a total of 16 memory sockets, where CPU 1 supports 10 DIMMs, and CPU 2 supports 6 DIMMS. In each channel, the 1st socket is marked white and the 2nd socket black. Figure 79. Memory socket location Memory channels are organized as follows: Table 37. Memory channels Processor Channel 0 Channel 1 Intel processor 1 Slots A1 and A7 Slots A2 and A8 Intel processor 2 Slot B1 Slot B2 Channel 2 Slots A3 Slot B3 Channel 3 Channel 4 Channel 5 Slots A4 and A9 Slots A5 and A10 Slot A6 Slot B4 Slot B5 Slot B6 Installing and removing system components 101
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/101.png)