Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 127
Installing the processor into a processor and heat sink module, Next steps, Prerequisites
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Figure 99. Loosening the processor bracket 4. Lift the bracket and the processor away from the heat sink, and place the processor connector side down on the processor tray. 5. Flex the outer edges of the bracket to release the bracket from the processor. NOTE: Ensure that the processor and the bracket are placed in the tray after you remove the heat sink. Figure 100. Removing the processor bracket Next steps Install the processor into a processor and heat sink module. Installing the processor into a processor and heat sink module Prerequisites Follow the safety guidelines listed in Safety instructions. Installing and removing system components 127
Figure 99. Loosening the processor bracket
4.
Lift the bracket and the processor away from the heat sink, and place the processor connector side down on the processor
tray.
5.
Flex the outer edges of the bracket to release the bracket from the processor.
NOTE:
Ensure that the processor and the bracket are placed in the tray after you remove the heat sink.
Figure 100. Removing the processor bracket
Next steps
Install the processor into a processor and heat sink module
.
Installing the processor into a processor and heat sink module
Prerequisites
Follow the safety guidelines listed in
Safety instructions
.
Installing and removing system components
127