Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 13
Table 2. Front view of 4 x 2.5-inch drive system continued, Table 3. Front view of 6 x EDSFF drive
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 2. Front view of 4 x 2.5-inch drive system (continued) Item Ports, panels, and slots Icon 13 VGA port 14 System status indicator cable N/A port 15 System identification button For more information about the ports, see the Technical Specifications section. Description User's Guide at www.dell.com/idracmanuals Enables you to connect a display device to the system. For more information, see the Technical specifications section. Enables you to connect the status indicator cable and view system status when CMA is installed. The System Identification (ID) button is available on the front to identify a system in a rack by turning on the system ID button to reset iDRAC and to access BIOS using the step through mode. Figure 3. Front view of 6 x EDSFF drive system Table 3. Front view of 6 x EDSFF drive system Item Ports, panels, and slots 1 Serial port Icon IOIOI 2 GPU riser 1 slots N/A 3 GPU riser 2 slots N/A 4 EDSFF drive bay assembly N/A Description Enables you to connect a serial device to the system. For more information, see the Technical specifications section. The GPU card slot (riser 1) connects up to two full-height GPUs. For more information, see the Expansion card installation guidelines section. The GPU card slot (riser 2) connects up to two full-height GPUs. For more information, see the Expansion card installation guidelines section. Enable you to install drives that are supported on your system. For more information PowerEdge XE2420 system overview 13
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/13.png)