Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 60
System cover, Removing the system cover
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Figure 32. Front bezel tray installation Next steps 1. If unlocked, lock the bezel tray with chassis. 2. Route the front connecting cables through the brush filters, and connect the cables to their respective ports. System cover Removing the system cover Prerequisites 1. Follow the safety guidelines listed in the Safety instruction. 2. If installed, remove the front bezel cover Steps 1. Loosen the thumbscrew on the front of chassis securing the system cover. 2. Slide the system cover towards the front, and lift the system cover. 60 Installing and removing system components
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/60.png)
Figure 32. Front bezel tray installation
Next steps
1.
If unlocked, lock the bezel tray with chassis.
2.
Route the front connecting cables through the brush filters, and connect the cables to their respective ports.
System cover
Removing the system cover
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instruction
.
2.
If installed,
remove the front bezel cover
Steps
1.
Loosen the thumbscrew on the front of chassis securing the system cover.
2.
Slide the system cover towards the front, and lift the system cover.
60
Installing and removing system components