Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 124
Installing the expansion card into the interposer, Filler bracket removal
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Next steps Replace the expansion card into the interposer. Installing the expansion card into the interposer Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the GPU riser 2. 4. Disconnect all the cables connected to the interposer. 5. Remove the interposer. 6. If applicable, disconnect all the cables connected to the expansion card. Steps 1. Open the PCIe card holder latch. 2. If installed, remove the filler bracket. NOTE: Store the filler bracket for future use. Filler brackets must be installed in empty expansion card slots to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system. Figure 96. Filler bracket removal 3. Hold the card by its edges, and align the card edge connector with the expansion card connector on the interposer. 124 Installing and removing system components
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/124.png)