Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 79
Installing the cooling fan cables
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 53. Cooling fan cables removal Next steps Replace the cooling fan cables. Installing the cooling fan cables Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove all the cooling fans. 4. Remove the cooling fan backplane. 5. Remove the GPU riser 2 6. Remove the GPU riser 1 or second drive bay assembly. 7. Remove the NVME riser. 8. Remove the air shroud. Steps 1. Align the cable points with the points on the chassis and move the cables towards the right. 2. Tighten the thumbscrews to secure the cables with the chassis. Installing and removing system components 79
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/79.png)
Figure 53. Cooling fan cables removal
Next steps
Replace the cooling fan cables.
Installing the cooling fan cables
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove all the cooling fans.
4.
Remove the cooling fan backplane.
5.
Remove the GPU riser 2
6.
Remove the
GPU riser 1
or
second drive bay assembly
.
7.
Remove the NVME riser.
8.
Remove the air shroud.
Steps
1.
Align the cable points with the points on the chassis and move the cables towards the right.
2.
Tighten the thumbscrews to secure the cables with the chassis.
Installing and removing system components
79