Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 77
Installing a cooling fan backplane
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Installing a cooling fan backplane Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove all the cooling fans. Steps 1. Align the cooling fan backplane with the pins on the backplane tray. 2. Slide the backplane towards the left to lock the backplane on the tray. Figure 51. Fan backplane board installation 3. Insert the tray firmly into the slot until the backplane connectors is fully connected to the cables. 4. Tighten the thumbscrews. Installing and removing system components 77
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/77.png)
Installing a cooling fan backplane
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove all the cooling fans.
Steps
1.
Align the cooling fan backplane with the pins on the backplane tray.
2.
Slide the backplane towards the left to lock the backplane on the tray.
Figure 51. Fan backplane board installation
3.
Insert the tray firmly into the slot until the backplane connectors is fully connected to the cables.
4.
Tighten the thumbscrews.
Installing and removing system components
77