Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 93
Installing the control panel, Control panel assembly removal
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Figure 68. Control panel assembly removal Next steps Replace the control panel. Installing the control panel Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the primary drive bay assembly. Steps 1. Align the 4 hooks located on the back side of the plastic panel, and insert the control panel assembly in the server chassis. 2. Slide the assembly towards the right to lock the assembly on the server chassis. 3. Using the Phillips #1 screwdriver, tighten the screws to secure the control panel assembly to the system chassis. Figure 69. Installing the control panel assembly Installing and removing system components 93
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/93.png)
Figure 68. Control panel assembly removal
Next steps
Replace the control panel
.
Installing the control panel
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove the primary drive bay assembly.
Steps
1.
Align the 4 hooks located on the back side of the plastic panel, and insert the control panel assembly in the server chassis.
2.
Slide the assembly towards the right to lock the assembly on the server chassis.
3.
Using the Phillips #1 screwdriver, tighten the screws to secure the control panel assembly to the system chassis.
Figure 69. Installing the control panel assembly
Installing and removing system components
93