Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 63
Installing a drive blank, Removing the drive carrier
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Figure 35. Removing a drive blank Next steps Installing a drive or replace the drive blank. Installing a drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If installed, remove the front bezel cover. Steps Insert the drive blank into the drive slot until the release button clicks into place. Figure 36. Installing a drive blank Next steps If removed, install the front bezel cover. Removing the drive carrier Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If installed, remove the front bezel cover. 3. Using the management software, prepare the drive for removal. If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are off, the drive is ready for removal. For more information, see the documentation for the storage controller. Installing and removing system components 63
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/63.png)