Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 74

Cooling fan, Removing a cooling fan

Get Dell PowerEdge XE2420 PDF manuals and user guides View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

NOTE: To protect the power supply from electrostatic discharge, the captive screws must be covered with the rubber cap before inserting the mating connector into the power supply. 3. Rotate the rubber cap clockwise to fix it over the captive screws. 4. Insert the mating connector into the power supply. Cooling fan Removing a cooling fan Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps Holding the orange and black edges on the fan module, lift the cooling fan module vertically to disconnect from the connector on the fan backplane. Figure 47. Cooling fan removal Next steps Replace a fan. Installing a cooling fan Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Align and place the fan module connector horizontally with the connector on the system board. 2. Press the touch point on the cooling fan module until firmly connected. 74 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
NOTE:
To protect the power supply from electrostatic discharge, the captive screws must be covered with the rubber
cap before inserting the mating connector into the power supply.
3.
Rotate the rubber cap clockwise to fix it over the captive screws.
4.
Insert the mating connector into the power supply.
Cooling fan
Removing a cooling fan
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions.
2.
Follow the procedure listed in the
Before working inside your system
.
Steps
Holding the orange and black edges on the fan module, lift the cooling fan module vertically to disconnect from the connector
on the fan backplane.
Figure 47. Cooling fan removal
Next steps
Replace a fan
.
Installing a cooling fan
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions.
2.
Follow the procedure listed in the
Before working inside your system.
Steps
1.
Align and place the fan module connector horizontally with the connector on the system board.
2.
Press the touch point on the cooling fan module until firmly connected.
74
Installing and removing system components