Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 158
Storage controller specifications, Drive specifications, Drives
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Table 56. Memory module sockets Memory module sockets Sixteen 288-pin Speed 2933 MT/s, 2666 MT/s Storage controller specifications The PowerEdge XE2420 system supports the following controller cards: Table 57. PowerEdge XE2420 system controller cards Internal controllers External controllers ● PERC H740P ● PERC H730P+ ● PERC H330+ ● S140 ● HBA330 ● Boot Optimized Storage Subsystem (BOSS-S1): HWRAID 2 x M.2 SSDs External controller is not supported. Drive specifications Drives The PowerEdge XE2420 system supports the following drive configurations: Table 58. Supported drives Configuration 1A 2C 3A Number of drives up to 2 x 2.5-inch up to 4 x 2.5-inch up to 6 x SSDs Drive types SATA/NVME SATA/NVME/SAS Enterprise and Data Center SSD Form Factor (EDSFF) NOTE: In 2C configuration, hard drive slots 2 and 3 do not support NVMe drives if only one processor is installed. NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Expres> Browse all Products > Data Center Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and Documentss Flash NVMe PCIe SSD User's Guide at https://www.dell.com/ support. 158 Technical specifications
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/158.png)