Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 15
Rear view of the system
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Table 3. Front view of 6 x EDSFF drive system (continued) Item Ports, panels, and slots Icon 15 System identification button For more information about the ports, see the Technical Specifications section. Rear view of the system Description view system status when CMA is installed. The System Identification (ID) button is available on the front to identify a system in a rack by turning on the system ID button to reset iDRAC and to access BIOS using the step through mode. Figure 4. Rear view of the system Table 4. Rear view of the system Item Ports, panels and slots 1 Blank filler 2 Cooling fan vents 3 Fan board tray Icon N/A N/A N/A 4 Fan board securing N/A thumbscrews Description This is a blank filler. These are the cooling fan vents. This is the tray which has the fan backplane. All the six fans are connected on the fan backplane. This is a thumbscrew that secures the fan board. PowerEdge XE2420 system overview 15
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/15.png)