Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 122
Removing the expansion card from the interposer, Interposer installation
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Figure 93. Interposer installation 3. Connect the interposer cables. Next steps 1. Install the GPU riser 2 2. After working inside the system . Removing the expansion card from the interposer Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the GPU riser 2 4. Disconnect all the cables connected to the interposer. 5. Remove the interposer 6. If applicable, disconnect all the cables connected to the expansion card. Steps 1. Open the PCIe card holder latch. 2. Hold the expansion card by its edges, and pull the card until the card edge connector disengages from the expansion card connector on the interposer. 122 Installing and removing system components