Dell PowerEdge XE2420 EMC Installation and Service Manual - Page 85
Installing an EDSFF switch backplane
![]() |
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 60. EDSFF switch backplane board removal Next steps Replace a EDSFF switch backplane. Installing an EDSFF switch backplane Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove all the EDSFF drives. 4. Remove all the cables that are connected to the EDSFF switch backplane. 5. Remove the EDSFF switch backplane assembly. Steps 1. Align the EDSFF switch backplane with the pins on the backplane assembly. 2. Slide the backplane towards the left until the plunger is engaged to lock the backplane on the tray. Installing and removing system components 85
![](/manual_guide/products/dell-poweredge-xe2420-emc-installation-service-manual-0f96234/85.png)
Figure 60. EDSFF switch backplane board removal
Next steps
Replace a EDSFF switch backplane
.
Installing an EDSFF switch backplane
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove all the EDSFF drives.
4.
Remove all the cables that are connected to the EDSFF switch backplane.
5.
Remove the EDSFF switch backplane assembly.
Steps
1.
Align the EDSFF switch backplane with the pins on the backplane assembly.
2.
Slide the backplane towards the left until the plunger is engaged to lock the backplane on the tray.
Installing and removing system components
85