Garmin G1000H Bell 407GX Pilot's Guide - Page 114
AUTO-TUNING FROM THE MFD, Garmin G1000H, Pilot's Guide for the Bell 407GX
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
AUDIO PANEL AND CNS AUTO-TUNING FROM THE MFD Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT page group by highlighting the frequency and pressing the ENT Key (Figures 4-9, 4-10, and 4-11). Auto-tuning a COM frequency from the WPT and NRST Pages: 1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the appropriate softkey. 2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-11). 3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio. 4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field. Turn the FMS Knob to Scroll Through a List of Frequencies Press the ENT Key to Load a Highlighted Frequency into the COM Standby Frequency Box Figure 4-9 Frequency Auto-Tuning from the MFD Or: 1) On the Nearest Airports, Frequencies, or Airspaces page, press the MENU Key to display the page menu. 2) Turn the large FMS Knob to scroll through the menu options. 3) Press the ENT Key to place the cursor on the desired selection. 4) Scroll through the frequency selections with the FMS Knob. 5) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio. 6) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field. Nearest Airports Menu Nearest Frequencies Menu Figure 4-10 Nearest Pages Menus Nearest Airspaces Menu 102 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A