Garmin G1000H Bell 407GX Pilot's Guide - Page 422

ADDITIONAL FEATURES The ChartView time critical information can also be found on the AUX - System Status page. The database CYCLE number, EXPIRES, and DISABLES dates of the ChartView subscription appear in either blue or yellow text. When the ChartView EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is shown as the DISABLES date. When the DISABLES date is reached, charts are no longer available for viewing. The SHW CHRT Softkey label then appears subdued and is disabled until a revised issue of ChartView is installed. NOTE: A subdued softkey label indicates the function is disabled. Select the MFD1 DB Softkey to place the cursor in the DATABASE window. Scroll through the listed information by turning the FMS Knob or pressing the ENT Key until the ChartView database information is shown. The ChartView database cycle number shown in the figure, 1004, is deciphered as follows: 10 - Indicates the year 2010 04 - Indicates the fourth issue of the ChartView database for the year The EXPIRES date 05-MAR-10 is the date that this database should be replaced with the next issue. The DISABLES date 14-MAY-10 is the date that this database becomes inoperative. ChartView Data Figure 8-46 AUX - System Status Page, ChartView Current and Available The ChartView database is obtained directly from Jeppesen. Refer to Updating Jeppesen Databases in Appendix B for instructions on revising the ChartView database. 410 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A