Garmin G1000H Bell 407GX Pilot's Guide - Page 387
SVS Features, PATHWAYS
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
SVS FEATURES Airport Runway Flight Path Marker Airplane Symbol ADDITIONAL FEATURES Selected Altitude Zero Pitch Line (ZPL) with Compass Heading Marks Pathways Synthetic Terrain SVS Softkeys Figure 8-3 SVS on the Primary Flight Display NOTE: Pathways and terrain features are not a substitute for standard course and altitude deviation information provided by the CDI, VSI, and VDI. NOTE: Pathways are not available when the cross-pointer (X-Pointer) flight director format is selected. PATHWAYS Pathways provide a three-dimensional perspective view of the selected route of flight shown as colored rectangular boxes representing the horizontal and vertical flight path of the active flight plan. The box size represents 700 feet wide by 200 feet tall during enroute, oceanic, and terminal flight phases. During an approach, the box width is 700 feet or one half full scale deviation on the HSI, whichever is less. The height is 200 feet or one half full scale deviation on the VDI, whichever is less. The altitude at which the pathway boxes are displayed is determined by the selected altitude during climb, cruise, and when the active leg is the final approach course prior to intercepting the glidepath/glideslope. During a descent (except while on the approach glidepath/glideslope), the pathway boxes are displayed at the selected altitude, or the VNAV altitude programmed for the active leg in the flight plan, or the published altitude constraint, whichever is higher (Figure 8-4). Just prior to intercepting the glidepath/glideslope, the pathway boxes are displayed on the glidepath/glideslope, or the selected altitude, whichever is lower. The color of the rectangular boxes may be magenta, green, or white depending on the route of flight and navigation source selected. The active GPS or GPS overlay flight plan leg is represented by magenta boxes that correspond to the Magenta CDI. A localizer course is represented by green boxes that correspond to a green CDI. An inactive leg of an active flight plan is represented by white boxes corresponding to a white line drawn on the Inset map or MFD map indicating an inactive leg. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 375