Garmin G1000H Bell 407GX Pilot's Guide - Page 507
Flight Plan Import/Export Messages, Message, Comments, MAG VAR WARN, CHECK CRS, PFD1, or MFD1], CARD 1
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 507 highlights
APPENDIX A MISCELLANEOUS MESSAGE ADVISORIES (CONT.) Message Comments MAG VAR WARN - Large magnetic The GDU's internal model cannot determine the exact magnetic variance for geographic variance. Verify all course angles. locations near the magnetic poles. Displayed magnetic course angles may differ from the actual magnetic heading by more than 2°. SVS - SVS DISABLED: Out of available terrain region. Synthetic Vision is disabled because the aircraft is not within the boundaries of the installed terrain database. SVS - SVS DISABLED: Terrain DB resolution too low. Synthetic Vision is disabled because a terrain database of sufficient resolution (9 arcsecond or better) is not currently installed. SCHEDULER [#] - . Message criteria entered by the user. CHECK CRS - Database course for Selected course for LOC1 differs from published localizer course by more than 10 LOC1 / [LOC ID] is [CRS]°. degrees. CHECK CRS - Database course for Selected course for LOC2 differs from published localizer course by more than 10 LOC2 / [LOC ID] is [CRS]°. degrees. [PFD1, PFD2, or MFD1] CARD 1 REM - Card 1 was removed. Reinsert card. The SD card was removed from the top card slot of the specified PFD or MFD. The SD card needs to be reinserted. [PFD1, PFD2, or MFD1] CARD 2 REM - Card 2 was removed. Reinsert card. The SD card was removed from the bottom card slot of the specified PFD or MFD. The SD card needs to be reinserted. [PFD1, PFD2, or MFD1] CARD 1 ERR - Card 1 is invalid. The SD card in the top card slot of the specified PFD or MFD contains invalid data. [PFD1, PFD2, or MFD1] CARD 2 ERR - Card 2 is invalid. The SD card in the bottom card slot of the specified PFD or MFD contains invalid data. HDG PRESET MODE - Magnetic The magnetometer has detected a magnetic anomoly that could affect heading anomoly detected. HPM is available. indications. Heading Preset Mode may be used. FLIGHT PLAN IMPORT/EXPORT MESSAGES In some circumstances, some messages may appear in conjunction with others. Flight Plan Import/Export Results Description 'Flight plan successfully imported.' A flight plan file stored on the SD card was successfully imported as a stored flight plan. 'File contained user waypoints only. User waypoints The file stored on the SD card did not contain a flight plan, only user waypoints. These waypoints imported successfully. No stored flight plan data have been saved to the system user waypoints. No flight plans stored in the system have been was modified.' modified. 'No flight plan files found to import.' The SD card contains no flight plan data. 'Flight plan import failed.' Flight plan data was not successfully imported from the SD card. 'Flight plan partially imported.' Some flight plan waypoints were successfully imported from the SD card, however others had errors and were not imported. A partial stored flight plan now exists in the system. 'File contained user waypoints only.' The file stored on the SD card did not contain a flight plan, only user waypoints. One or more of these waypoints did not import successfully. 'Too many points. Flight plan truncated.' The flight plan on the SD card contains more waypoints than the system can support. The flight plan was imported with as many waypoints as possible. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 495