Garmin G1000H Bell 407GX Pilot's Guide - Page 177
Airports, Waypoint Information Window - Duplicate Identifier
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Identifier with Duplicates FLIGHT MANAGEMENT Duplicate Waypoints Duplicate Message AIRPORTS Figure 5-31 Waypoint Information Window - Duplicate Identifier NOTE: 'North Up' orientation on the Airport Information Page cannot be changed; the pilot needs to be aware of proper orientation if the Navigation Map orientation is different from the Airport Information Page Map. The Airport Information Page is the first page in WPT group and allows the pilot to view airport information, load frequencies (COM, NAV, and lighting), review runways, and review instrument procedures that may be involved in the flight plan. See the Audio Panel and CNS Section for more information on loading frequencies (auto-tuning). After engine startup, the Airport Information Page defaults to the airport where the aircraft is located. After a flight plan has been loaded, it defaults to the destination airport. On a flight plan with multiple airports, it defaults to the airport which is the current active waypoint. In addition to displaying a map of the currently selected airport and surrounding area, the Airport Information Page displays airport information in three boxes labeled 'AIRPORT', 'RUNWAYS', and 'FREQUENCIES'. For airports with multiple runways, information for each runway is available. This information is viewed on the Airport Information Page by pressing the INFO softkey until INFO-1 is displayed. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 165