Garmin G1000H Bell 407GX Pilot's Guide - Page 76
GPS CDI SCALING, Garmin G1000H, Pilot's Guide for the Bell 407GX
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
FLIGHT INSTRUMENTS GPS CDI SCALING When GPS is the selected navigation source, the flight plan legs are sequenced automatically and annunciations appear on the HSI for the flight phase. Flight phase annunciations are normally shown in magenta, but when cautionary conditions exist the color changes to yellow. If the current leg in the flight plan is a heading leg, 'HDG LEG' is annunciated in magenta beneath the aircraft symbol. The current GPS CDI scale setting is displayed as 'System CDI' on the AUX - System Setup Page and the fullscale deflection setting may also be changed (2.0 nm, 1.0 nm, 0.3 nm, or Auto) from this page. If the selected scaling is smaller than the automatic setting for enroute and terminal phases, the CDI is scaled accordingly and the selected setting is be displayed rather than the flight phase annunciation. Changing the selected GPS CDI setting: 1) Use the FMS Knob to select the AUX - System Setup Page on the MFD. 2) Press the FMS Knob to activate the cursor. 3) Turn the large FMS Knob to highlight 'Selected' in the 'GPS CDI' box. 4) Turn the small FMS Knob to highlight the desired setting and press the ENT Key. 5) To cancel the selection, press the FMS Knob or the CLR Key. Figure 2-28 GPS CDI Settings (AUX - System Setup Page) When set to 'Auto' (default), the GPS CDI scale automatically adjusts to the desired limits based upon the current phase of flight (Figure 2-29, Table 2-1). 64 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev A