Garmin G1000H Bell 407GX Pilot's Guide - Page 372
Garmin G1000H, Pilot's Guide for the Bell 407GX, Displaying traffic on the Traffic Map OPERATE
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
HAZARD AVOIDANCE Altitude Mode Altitude Mode Non-Threat Traffic, 2500' Above, Descending "No Bearing" Traffic (Bearing Undetermined), Distance 4.0 nm, 500' Above, Climbing Proximity Traffic, 900' Above, Level, Flight ID Displayed Traffic Advisory with ADS-B Directional Information, 500' Below, Climbing Traffic Display Range Rings Non-Threat Traffic with ADS-B Directional Information, 6000' Above, Level Traffic Advisory OffScale, 400' Below, Level Non-Threat Traffic, Altitude Not Reported Figure 6-95 Traffic Map Page Displaying traffic on the Traffic Map Page: 1) Turn the large FMS Knob to select the Map Page Group. 2) Turn the small FMS Knob to select the Traffic Map Page. 3) Select the OPERATE Softkey to begin displaying traffic. OPERATING is displayed in the Traffic mode field. 4) Select the STANDBY Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic mode field. 5) Turn the RANGE Knob clockwise to display a larger area or counter-clockwise to display a smaller area. 360 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A